Plastic steel sheet piles are a new type of support structure material manufactured by extruding or injection molding a polymer matrix (such as polyethylene or polypropylene) reinforced with glass fiber, carbon fiber, and modifiers. Thin steel plates or steel frames are laminated at critical stress points. Their core properties can be summarized as follows:
High Corrosion Resistance: Unlike traditional steel sheet piles susceptible to seawater and acidic/alkaline soil corrosion, the polymer matrix exhibits outstanding chemical stability. In corrosive environments like marine engineering, wastewater treatment plants, and chemical industrial parks, their service life exceeds 30 years—far surpassing the 10-15 years of conventional steel sheet piles.
Lightweight yet High-Strength: With a density only 1/4 to 1/5 that of steel, the weight of each pile is significantly reduced, decreasing the load on lifting equipment and lowering construction energy consumption. Simultaneously, the composite design combining reinforcing materials and a steel skeleton provides bending and shear strength sufficient for medium-load support projects, with a yield strength reaching 150-250 MPa.
Superior waterproofing performance: The forming process achieves seamless surface connections, with specialized rubber seals at joints. The permeability coefficient can be as low as 10⁻⁷-10⁻⁸ cm/s, far surpassing traditional steel sheet piles that suffer from water ingress due to welding gaps and corrosion. This makes them particularly suitable for projects like foundation pit dewatering and riverbank waterproofing.
High construction convenience: The pile body features a modular design with interfaces primarily in mortise-and-tenon or tongue-and-groove configurations, enabling rapid assembly and installation. Its material exhibits good toughness, minimizing breakage during pile driving and demonstrating superior adaptability to complex geologies (e.g., gravel layers, mixed fill layers). Construction efficiency is increased by 20%-30% compared to traditional steel sheet piles.