Definition and Core Properties of Plastic-Steel Sheet Piles
Plastic-steel sheet piles are engineered support structures manufactured by extruding or injection molding a polymer matrix (such as polyethylene or polypropylene) reinforced with glass fiber, carbon fiber, and modifiers. Critical load-bearing sections are reinforced with composite thin steel plates or steel frames. Their core properties are summarized as follows:
Exceptional Corrosion Resistance: Unlike traditional steel sheet piles susceptible to seawater and acidic/alkaline soil corrosion, the polymer matrix exhibits outstanding chemical stability. In corrosive environments like marine engineering, wastewater treatment plants, and chemical industrial parks, their service life exceeds 30 years—significantly surpassing the 10-15 year lifespan of conventional steel sheet piles.
Lightweight yet High-Strength: With a density only 1/4 to 1/5 that of steel, the weight of each pile is significantly reduced, decreasing the load on lifting equipment and lowering construction energy consumption. Simultaneously, the composite design of reinforcing materials and steel skeleton ensures bending and shear strengths sufficient for medium-load support projects, with yield strengths reaching 150-250 MPa.
Superior waterproofing performance: The forming process achieves seamless surface connections, with specialized rubber seals at joints. The permeability coefficient can be as low as 10⁻⁷-10⁻⁸ cm/s, far surpassing traditional steel sheet piles that suffer from water ingress due to weld gaps and corrosion. This makes them particularly suitable for projects like foundation pit dewatering and riverbank seepage control.
High construction convenience: The pile body features a modular design with interfaces primarily in mortise-and-tenon or tongue-and-groove configurations, enabling rapid assembly and installation. Its material exhibits good toughness, minimizing breakage during pile driving and demonstrating superior adaptability to complex geologies (e.g., gravel layers, mixed fill layers). Construction efficiency is increased by 20%-30% compared to traditional steel sheet piles.